Concrete Patios in Abbott, TX
Concrete patios in Abbott, TX are laid out, formed and poured by Waco Elite Concrete as a slab off the back door, a floor under a new patio cover or an extension tied to an old patio, with the mix, fall and finish chosen at a free estimate.
Call or request a free estimate any time, 24/7
No charge answered 24/7
Get free estimates
Rain, sun and the patio's finish
About 82% of Abbott's occupied homes are lived in by their owners, according to Census Bureau survey estimates for 2020–2024. The Texas State Historical Association says 56 percent of Hill County's yearly rain arrives between April and September, and it puts the annual average at 32 to 36 inches in the west of the county and 36 to 40 in the east.
Finish changes how a patio sheds that water: a patterned or textured top drains more slowly than a smooth one, one published guide notes, since water sits in the indentations. Where the patio meets a wall, steps or a walk, NRMCA puts an isolation joint so each part can move on its own.
Pour-day weather counts as well, since air between 50°F and 80°F gives concrete its best cure.
For a patterned slab, see stamped patios; for a walk out to it, the sidewalk page; and for the rest, everything else we do in Abbott.
Call or request a free estimate any time, 24/7.
(254) 309-9254From stakes to a cured patio
Stake it and set the fall
Stakes mark the outline, and the grade is set to carry water away from the house.
Form, place, texture
Forms go up, the concrete is placed and finished, and a broom texture gives it grip.
Saw joints, then cure
Control joints are sawed in time, then curing compound or water keeps the surface from drying out.
Call or request a free estimate any time, 24/7.
(254) 309-9254Patio slab and finish prices
A patio slab 4 to 6 inches thick runs $6 to $9 a square foot in national 2026 figures, before any finish is added. Averages, not a quote.
- Broom finish
- $1 to $3, or included
- Smooth trowel
- $1 to $3, or included
- Exposed aggregate
- $7 to $15
- Stamped
- $10 to $18
- Stained
- $8 to $15
National averages per square foot, 2026. Not a quote.
Before an Abbott patio is poured
How hot can patio concrete be when the truck arrives?
The ceiling is 95°F at discharge, set by ACI 305.1-14, the American Concrete Institute's hot-weather specification, and by ACI 301-20. NRMCA notes that chilled mixing water can take as much as 10°F off the concrete's temperature on a hot day, and ice as much as 20°F.
How long must a new patio be kept from freezing?
Until it has gained 500 psi of strength, roughly two days after it is placed, NRMCA says. Fresh concrete freezes at around 25°F, and if it does, more than 50% of its potential strength can be lost. ACI 306R-16 treats a pour as cold-weather work once the air falls, or is expected to fall, below 40°F during the protection period.
What strength of concrete should a patio be ordered at?
For exterior slabs, NRMCA advises 4,000 psi, consistent with ACI 332, the residential concrete code, or 3,500 psi where the slab won't stay continuously moist and won't see deicing chemicals. That advice is written for freeze-thaw exposure and comes with 6 percent air and a 3 to 5 inch slump.
Plan an Abbott patio, free
Choose patio in the form and add a phone number or email. Pricing it costs nothing, and requests are answered 24/7.