Commercial Concrete in Bellmead, TX
Commercial concrete in Bellmead, TX, for businesses on North State Loop 340, Interstate 35 and Bellmead Drive, is poured by Waco Elite Concrete: building slabs, walks, entrances and site paving, each priced with a free estimate.
Call or request a free estimate any time, 24/7
No charge answered 24/7
Get free estimates
Commercial sites on Bellmead's state highways
Three roads through the city are state highways, and the City's right-of-way application names them: North State Loop 340, Interstate 35 and Highway 84/Bellmead Drive. That form, marked for franchised utility providers, asks for a copy of the approved TxDOT permit on any project along the three, and TxDOT runs its own permit for a new or changed driveway onto a state highway, so a business entrance there involves two offices.
The Texas State Historical Association counted eighty-five businesses in Bellmead by 1960, when the town had 5,127 residents. Paving beside the building is covered under parking lots and drive lanes, entry walks under Bellmead sidewalk work, and the rest on the town's full service list.
Call or request a free estimate any time, 24/7.
(254) 309-9254From site walk to cured slab
Walk the site
Send the plans or the square footage and loads. Access and drainage are checked for a free estimate.
Line up the approvals
The City's flatwork fee, plus TxDOT's Form 1058 for an entrance on one of the three highways, before the forms go up.
Pour, then cure
Moist curing matters: set beside moist-cured concrete, a slab left in a dry environment may fall short of its potential strength by as much as 50 percent.
Call or request a free estimate any time, 24/7.
(254) 309-9254Ready-mix prices for commercial pours
Commercial jobs are bought by the cubic yard, and the price climbs with the strength specified. The ticket gives national averages for 2026, which include delivery up to 20 miles. They are averages, not our prices.
- 3,000 psi
- $124 / yd
- 4,000 psi
- $129 / yd
- 5,000 psi
- $147 / yd
- Full 10-yard truckload, delivered
- $1,169 to $1,444
National averages, 2026. Averages, not a quote.
Commercial concrete questions for Bellmead
What does Bellmead charge for a commercial flatwork permit?
The City's Master Fee Schedule lists commercial Concrete Flatwork at $150 for the first 1,000 square feet plus $0.05 for each square foot after that. The schedule carries no date and doesn't say which jobs need the permit, so confirm both with Community Development before a pour.
How does a business get a new entrance onto Loop 340 or I-35?
TxDOT handles it with Form 1058, the "Permit to Construct Access Driveway Facilities on Highway Right of Way", which covers building a new driveway or revising an existing one. The property owner or an authorized representative applies through the district office, for McLennan County the Waco District, and nothing is built in the right-of-way before the fully executed permit arrives and TxDOT gets 24 hours' notice.
When does Bellmead allow lane closures for work in the street?
On the City's right-of-way application, approved lane closures can only run from 9:00 a.m. to 3:00 p.m., and each needs at least two business days' notice. That form is marked for franchised utility providers, so ask Public Works how the rule applies to curb or entrance work by a contractor.
Commercial concrete, priced free
Mark commercial concrete in the form, give a phone or email, and send plans later if you have them. Requests get an answer 24/7.