Commercial Concrete in Beverly Hills, TX
Commercial concrete in Beverly Hills, TX, from the building slab to the curbs, walks and pads around it, is formed, poured and finished by Waco Elite Concrete, and pricing the job costs nothing.
Call or request a free estimate any time, 24/7
No charge answered 24/7
Get free estimates
Building slabs, curb and gutter for a business site
Beverly Hills' Code of Ordinances, posted online through an ordinance adopted September 9, 2014, has a Chapter 10 on subdivision regulation and a Chapter 14 on zoning, and City Hall handles planning as well as permits. We found no published City rule for commercial concrete, so settle what a project needs there before the drawings are final.
Curb and gutter to a state spec
Where plans call for TxDOT's Item 529, curb and gutter is Class A concrete unless the plans name another class, and fibers may take the place of reinforcing steel. Curing lasts 72 hours or more, an edging tool rounds the edges, a 10-foot straightedge may show no more than 1/4 inch of variation, and the curb's joints have to match those in the paving next to it.
The lot out front is under parking lot paving in Beverly Hills, the walks to the door have a page too, and smaller jobs are on our Beverly Hills page.
Call or request a free estimate any time, 24/7.
(254) 309-9254How a commercial pour comes together
Scope the pour, get a price
Send drawings, or the size, use and finish, for a free estimate.
Permits and a pour plan
Any permits are settled with City Hall, and the mix, testing and pour time are agreed with the owner and the supplier.
Place, finish and cure
The concrete is finished, then kept moist or sealed with a curing compound, since drying out early can cost it up to half the strength moist-cured concrete reaches.
Call or request a free estimate any time, 24/7.
(254) 309-9254Commercial concrete costs by the yard and by the foot
Ready-mix gets dearer as the strength goes up, as the ticket's typical Central Texas prices for 2025 show. For site work, a national average estimate for May 2026 puts installed curb and gutter at $63.32 to $77.78 a linear foot. Neither is our price.
- 3,000 PSI
- $120 to $126
- 4,000 PSI
- $129 to $135
- 5,000 PSI
- $138 to $145
- Delivery only, per truck
- $110 to $240
Typical Central Texas prices, 2025. Averages, not a quote.
Heat and curing questions on commercial concrete
Does summer heat weaken a commercial pour?
It can. Early curing at high temperatures leaves concrete weaker at later ages than identical concrete cured near 70°F, the National Ready Mixed Concrete Association says, and Waco averages 114.8 days a year at 90°F or above (1991–2020 normals). Cooling the mix helps: chilled water can lower its temperature up to 10°F, and ice up to 20°F.
Should a troweled shop or office floor be air-entrained?
Usually not. NRMCA puts the ceiling at 3% air for hard-troweled floor slabs, since entrained air makes the top layer likelier to delaminate, and delaminated layers usually break away 1/8 to 1/4 inch thick.
What makes a curing compound acceptable on a commercial slab?
Look for ASTM C309 or C1315, NRMCA's curing sheet says. The compound goes on once the sheen of surface water has gone, ideally as two coats laid crosswise to each other, and any plastic sheeting used in its place should be 4 mils thick or more.
Put a price on a Beverly Hills commercial pour
Select commercial concrete on the form, with a number or address for the reply. Pricing is free, and requests get an answer at any hour.