Concrete Resurfacing in China Spring, TX
Concrete resurfacing in China Spring, TX leaves a worn drive, patio or walk with a fresh, even surface and new sealer, applied by Waco Elite Concrete over concrete that's still sound, and the estimate is free.

Call or request a free estimate any time, 24/7
No charge answered 24/7
Get free estimates
A new surface on sound concrete
Only about 9% of China Spring's housing units are from 2000 or later, and the survey found none built since 2020 began, by the Census Bureau's 2020–2024 estimates (small-sample figures).
QUIKRETE's Re-Cap, for one, can be laid anywhere between a 1/16-inch feather edge and 1/2 inch; people can walk on it after 8 hours and drive on it after 24. Light or moderate scaling can be fixed with a thin bonded layer over sound, cleaned concrete, by the National Ready Mixed Concrete Association's account, though the color won't match the original. A slab with large cracks, significant spalling or severe settlement may not suit a stamped overlay at all.
The American Society of Concrete Contractors' guide ties gloss to color: the shinier the sealer, the richer the color looks, and solvent-based acrylics usually deepen it more than water-based ones. On exterior public walkways, anti-skid additive should be mixed in until it can be felt with a bare hand.
A patio that needs more than a new top is covered under patio work in China Spring, a drive past saving under driveway replacement, and the rest on our China Spring list.
Call or request a free estimate any time, 24/7.
(254) 309-9254Resurfacing in order
Test the slab
Cracks, scaling and any movement are checked, because only a sound slab should get a new surface.
Clean and roughen
The old surface is cleaned and roughened so the new layer can bond to it.
Resurface, then seal
The new layer goes on thin, the control joints are carried up through it, and sealer follows once it dries.
Call or request a free estimate any time, 24/7.
(254) 309-9254Price ranges for a new surface
For pool decks, national figures for 2026 start basic resurfacing at $4 to $8 a square foot and put decorative overlays at $6 to $12 or more. Sealing ran $1 to $3 a square foot in national driveway figures for 2025. Neither is our price; the free estimate prices your own slab.
Resurfacing and sealer questions
How to make existing concrete smooth?
A thin overlay can do it. Butterfield Color rates its T1000 fine overlay for layers from 1/16 inch up to 3/16 inch at most, with a compressive strength of 5,860 psi at 21 days.
What is a knockdown finish on concrete?
It's a spray-down deck coating. Euclid Chemical's Increte version goes on no more than 1/4 inch thick and is sealed after at least 24 hours of drying, with a grip additive allowed in the sealer. Pool decks, walkways and patio decks are the common uses its maker names.
Why did a sealed slab turn white?
Whitening happens when moisture, as water vapor or solvent, gets trapped between sealer layers, the American Society of Concrete Contractors' guide says. Efflorescence under the sealer is another matter: the guide's lasting cure is to strip the sealer, then acid-wash lightly at 20 to 40 parts water per part muriatic acid, or apply an efflorescence remover.
Free resurfacing estimates for China Spring
Resurfacing or sealing is selected in the form. Add a phone number or email, and the surface and its size can be talked over when we reply. Requests are answered 24/7.




