Open 24/7 Free estimates Serving Waco, Texas

(254) 309-9254

Commercial Concrete in Gholson, TX

Commercial concrete in Gholson, TX gets a number from Waco Elite Concrete once a free estimate has weighed three things: what the slab must carry, how flat the floor must be and what the City will review.

Commercial Concrete in Gholson, TX, example photo: new concrete drive aisle and loading area at a commercial building
(254) 309-9254

Call or request a free estimate any time, 24/7

No charge answered 24/7

Get free estimates

A phone number or an email, so we can reach you.

We use your details only for this estimate request. Privacy policy

What a commercial concrete estimate should check

Shop and warehouse floors carry two numbers. FF shows how bumpy or wavy the surface is, which reflects the finishing; FL shows how level it is, which reflects how the forms were set. Typical pairs from ACI 302.1R run 20/15 for noncritical areas such as mechanical rooms, 25/20 for carpeted offices and 35/25 for warehouse floors with moderate or heavy traffic.

Floors that will get coverings commonly have a vapor retarder specified beneath them; the National Ready Mixed Concrete Association's figure is 10 mils at minimum, placed directly under every interior floor slab.

The Texas Department of Licensing and Regulation's 41 programs leave out general contractors and concrete work, so ask each bidder directly about insurance and past jobs. Paving outside the building is on the Gholson parking lot page, house and shop floors are under slab work in Gholson, and the full Gholson service list covers the remaining jobs.

Call or request a free estimate any time, 24/7.

(254) 309-9254

From drawings to a cured commercial slab

  1. Share the drawings or the size

    The address, the slab size, the loads and any floor spec are enough to price it.

  2. Clear the review, then order

    Code and zoning questions go to City Hall first; then strength, slump and delivery are set with the supplier.

  3. Pour, then keep it moist

    Curing begins the moment finishing ends, because concrete allowed to dry out may give up as much as 50 percent of its potential strength.

Call or request a free estimate any time, 24/7.

(254) 309-9254

Ready-mix and slab prices for business jobs

In typical Temple figures for 2025, 3,000 psi concrete costs $120 to $126 a cubic yard, 4,000 psi $129 to $135 and 5,000 psi $138 to $145, plus $110 to $240 a truckload for delivery alone. National 2026 averages put an 8- to 10-inch foundation slab at $12 to $18 a square foot. These are averages, not a quote.

Plats, City review and limestone under commercial concrete

What does the City of Gholson review on a permit application?

Building code and zoning code compliance, its application says, and the owner or agent signs that all work will conform to the City's codes, laws and ordinances. No code edition or fee is named, so ask City Hall for both.

Does a new commercial building in Gholson need a plat of survey?

Plan on one. Gholson's permit form wants a plat of survey attached whenever the work is a new structure or changes an existing one; roofing, interior and siding work needs no plat.

Is limestone good ground for a building slab in McLennan County?

The 2001 county soil survey rates limestone bedrock as good footing for houses and roads, though it is commonly difficult to excavate. Loamy and clayey soils over limestone cover about 22 percent of the county.

A free price on commercial concrete in Gholson

Pick the job on the form and leave a phone or email; drawings can follow by reply. The estimate is free, and requests are answered 24/7.

(254) 309-9254Free estimate