Open 24/7 Free estimates Serving Waco, Texas

(254) 309-9254

Concrete Driveways in Lacy-Lakeview, TX

Concrete driveways in Lacy-Lakeview, TX are priced by Waco Elite Concrete through a free estimate that sizes the slab, picks the thickness and steel for your heaviest vehicle and checks the City's permit list before concrete is ordered.

Concrete Driveways in Lacy-Lakeview, TX, example photo: curved curb return at a driveway entrance
(254) 309-9254

Call or request a free estimate any time, 24/7

No charge answered 24/7

Get free estimates

A phone number or an email, so we can reach you.

We use your details only for this estimate request. Privacy policy

What a driveway estimate covers

The Census Bureau's 2020–2024 estimates count 600 of Lacy-Lakeview's 3,015 housing units, about 20%, as built in 2000 or later, 45 of them in 2020 or later.

Steel for the thickness

Mesh is the usual steel for drives of 4 to 5 inches; at 5 inches and up the practice switches to ½-inch (#4) rebar on a grid of roughly 12 inches, propped on blocks so it stays mid-slab.

Thickness and joints

The Tennessee Concrete Association puts the trade-off of a fifth inch at roughly 20% more concrete cost for nearly 50% more load-carrying capacity. On a 4-inch drive, control joints sit no more than 10 feet apart and 1 inch deep, with an isolation joint where the drive meets a sidewalk, garage slab or other paving.

A front walk can go in with it: see sidewalks in Lacy-Lakeview. A drive that is sound but tired may only need a resurfaced top, and Lacy-Lakeview's other concrete services are listed on one page.

Call or request a free estimate any time, 24/7.

(254) 309-9254

From estimate to first car

  1. Measure and price

    Length, width, thickness and the permit line are settled, free of charge.

  2. Prepare the ground

    Old concrete comes out, the base is compacted, and the steel goes in on blocks.

  3. Pour, cut and cure

    Joints are cut and the slab cures; cars can go on after 7 to 10 days if they keep off the edges, and everyday traffic after 30.

Call or request a free estimate any time, 24/7.

(254) 309-9254

Driveway price ranges

For a 400-square-foot drive, one Waco-area contractor's undated estimate runs $5,001 to $7,473 new and $6,752 to $9,533 to tear out and replace a 4-inch one. Typical Austin-area prices for 2026, by size, are on the ticket. Neither set is our price.

Batch ticketDriveways by size, Austin area
10 x 20 ft
$1,570 to $2,945
12 x 24 ft
$2,255 to $4,220
20 x 20 ft
$3,140 to $5,890
24 x 24 ft
$4,510 to $8,435
24 x 36 ft
$6,770 to $12,755

Typical Central Texas (Austin) prices, 2026. Averages, not a quote.

Questions before pouring a drive

Is a driveway on Lacy Lakeview's permit list?

Yes. The City's list of projects that require permits includes “Driveways and sidewalks”, and its permit applications are online forms. No driveway specs or right-of-way rules turned up on the City's pages, so ask its inspections department about the street edge.

Should driveway edges be thicker than the middle?

One published guide recommends it. The edges take the heaviest vehicle loads and have less soil support than the middle, so it suggests adding 1 to 2 inches there, carried 4 to 8 inches in from the perimeter.

How long should a concrete driveway last?

Thirty years or more if it is installed and kept up properly, by one published guide, compared with about 15 for asphalt.

Driveway estimates in Lacy-Lakeview, at no cost

Pick the driveway option in the job list and add a phone number or email. The estimate costs nothing, day or night.

(254) 309-9254Free estimate