Open 24/7 Free estimates Serving Waco, Texas

(254) 309-9254

Concrete Repair in Lorena, TX

Concrete repair in Lorena, TX from Waco Elite Concrete starts with how the slab was built, its thickness, its joints and any steel inside it, before cracks are filled or broken sections are cut out and poured again.

Concrete Repair in Lorena, TX, example photo: injection ports set along a crack for epoxy repair
(254) 309-9254

Call or request a free estimate any time, 24/7

No charge answered 24/7

Get free estimates

A phone number or an email, so we can reach you.

We use your details only for this estimate request. Privacy policy

Joints, steel and depth decide the fix

In Census Bureau survey estimates for 2020–2024, 262 of Lorena's 642 housing units, about 41%, date from before 1980 (the margins are wide). Every slab moves. Concrete shrinks and swells as moisture and temperature change and flexes under load, and the National Ready Mixed Concrete Association warns that cracks can occur where design and construction don't allow for that movement.

Joints give the movement somewhere to go. The association puts contraction joints about ¼ to ⅓ of the slab's thickness deep and 24 to 36 times the thickness apart, with 15 feet often recommended as the maximum. Steel does a different job: mesh and rebar won't stop a slab cracking, but in the right position they keep cracks narrower, and a cover of at least 2 inches shields the bars from salt and moisture, so rust can't swell and crack the slab.

A worn but sound surface may need only a new wearing surface, and a panel that has simply dropped may suit slab lifting instead. Every Lorena service sits on one page.

Call or request a free estimate any time, 24/7.

(254) 309-9254

Repairing a damaged slab

  1. Sound and measure

    Cracks are measured, hollow spots are found, and the cause of the damage is looked for.

  2. Cut back to sound concrete

    Damaged areas are marked in simple shapes, saw-cut and broken out down to solid material.

  3. Fill, patch or pour again

    Cracks are filled, spalls patched, or a broken section is poured again with its joints put back.

Call or request a free estimate any time, 24/7.

(254) 309-9254

Tear-out, cutting and removal prices

When a repair turns into partial replacement, these national figures for 2025 cover the cutting, breaking out and new concrete. They are averages, not our prices.

Batch ticketCutting and replacement, national
Tear out and replace a slab
$8 to $18 a sq ft
Removal with disposal
$3 to $8 a sq ft
Extra for reinforced concrete
$1 to $3 a sq ft
Concrete cutting
$5 to $15 a linear ft
Cutting minimum
$125 to $400

National prices, 2025. Averages, not a quote.

Before a broken slab is fixed

Does Lorena's permit list cover concrete repairs?

The list takes in all concrete work, drives, walks, porches and patios among it, without setting repairs apart from new pours. Ask City Hall before the job goes on the calendar.

How deep can a partial-depth patch go?

Only through the upper third of the pavement, in Federal Highway Administration guidance, and never so deep that the repair material would reach dowel bars. Damage that runs deeper calls for full-depth work.

How is hollow concrete found before a patch?

By sounding it. The American Concrete Institute's field guide for spall repair, which covers exterior slabs on ground, starts by sounding the concrete to find hollow areas, then marks simple repair shapes and saw-cuts the edges no deeper than the cover over the steel.

Have a cracked Lorena slab looked at, free

Choose repair from the job list, give us a phone or email, and tell us about the cracks once we get back to you. Replies come 24/7, and looking costs nothing.

(254) 309-9254Free estimate