Open 24/7 Free estimates Serving Waco, Texas

(254) 309-9254

Concrete Repair in Moody, TX

Concrete repair in Moody, TX starts with Waco Elite Concrete tracking down what broke the slab, whether missing joints, a washed-out base, rusting steel or roots, since the cause decides the fix, and the estimate is free.

Concrete Repair in Moody, TX, example photo: driveway crack routed and filled with gray sealant
(254) 309-9254

Call or request a free estimate any time, 24/7

No charge answered 24/7

Get free estimates

A phone number or an email, so we can reach you.

We use your details only for this estimate request. Privacy policy

Finding why the slab broke

The median year built of Moody's housing units is about 1973 in the Census Bureau's 2020–2024 survey estimates, a figure with a wide margin of 13 years either way.

NRMCA's list of common crack types includes plastic shrinkage, improper jointing, continuous external restraint, missing isolation joints, D-cracks from freezing and thawing, craze cracks and settlement cracks. Rusting steel is another: NRMCA notes that rust needs 2 to 4 times as much room as the steel it forms from, and the swelling breaks off the concrete cover.

Any repair is temporary, one published guide warns, though some last many years, and when the damage traces to roots under the slab or a pipe leaking beneath it, replacement may be the only answer.

Patch, partial depth or full depth

Patching only part of the depth suits spalls within the top third to half of the slab that leave the steel covered, by the American Concrete Pavement Association's rule; deeper damage, at or near half the thickness, gets a full-depth repair. If the slab is sound and only its top is worn, resurfacing in Moody may be enough; our Moody page lists the other jobs.

Call or request a free estimate any time, 24/7.

(254) 309-9254

From estimate to cured patch

  1. Tap for hollow spots

    Following the American Concrete Institute's spall-repair guide, the concrete is sounded for hollow areas and simple repair outlines are marked.

  2. Saw, chip, wash

    Edges are sawn only as deep as the concrete cover over the steel, then the area is blasted or washed at high pressure.

  3. Patch and keep it wet

    A ready-mix patch stays under wet burlap and plastic for 7 days or more.

Call or request a free estimate any time, 24/7.

(254) 309-9254

Repair and tear-out figures

Filling cracks runs $5 to $15 per linear foot in a national 2025 figure, and removing concrete about $4 a square foot ($2 to $4 unreinforced, $4 to $6 reinforced). None of these is our price.

Batch ticketConcrete removal by job, national
Steps
$250 to $400
Slab
$600 to $1,000
Patio
$1,000 to $2,000
Sidewalk
$1,200 to $2,200
Driveway
$1,500 to $2,500

National averages, 2025. Not a quote.

Rust, thin steel and through-cracks

What makes the steel inside concrete start to rust?

Chlorides, such as deicing salts, cause rebar corrosion more often than carbonation does, NRMCA says, and steel starts corroding when the pH of the concrete around it drops under 9.

What if the steel under a spall has rusted thin?

ACI's spall-repair guide says to consult a structural engineer when corroded bars have lost cross-section. In the repair itself, concrete comes out about ¾ inch around corroded bars, using 15- or 30-pound jackhammers, since heavier ones can damage the steel.

Can a crack that runs all the way through a slab be patched?

Not with a partial-depth patch. The American Concrete Pavement Association says that kind of repair can't fix a crack running through the slab's whole thickness; a full-depth repair is the route instead.

Find out what broke your slab

Choose concrete repair on the form and leave a phone number or email. The estimate is free, and requests are answered 24/7.

(254) 309-9254Free estimate