Concrete Driveways in Ross, TX
Concrete driveways in Ross, TX are built by Waco Elite Concrete on a base matched to the soil found at each lot, since the ground changes from one part of McLennan County to the next; the estimate costs nothing.
Call or request a free estimate any time, 24/7
No charge answered 24/7
Get free estimates
Checking the ground before a Ross driveway
McLennan County's USDA soil survey rates several of its clays as very limited for driveways and sidewalks, citing high shrink-swell: Houston Black, Heiden, Slidell, Branyon and Crawford among them. Eddy and Bosque soils come out not limited. In NRCS terms, very limited means the problems usually can't be fixed short of major soil reclamation, special design or costly installation. The map unit under Ross wasn't found in our sources, so each lot gets its own look.
Weak ground comes out first. The Michigan Concrete Association's guideline removes unstable subgrade to a depth of 6 inches or more and fills the hole back with crushed stone, gravel or sand at 95% compaction; for the slab it wants 4,000 psi concrete, 4 inches thick at minimum and 5 where delivery vehicles run. Its figures are written for Michigan's freeze-thaw climate.
Where a drive meets a state highway, TxDOT requires an access driveway permit (Form 1058) from its district office before any work in the right of way. Whether a frontage is state right of way is a question for TxDOT or the City.
A patterned drive is covered on stamped concrete in Ross, and a drive that is cracked but still sound on crack and section repair. The Ross service list has the rest.
Call or request a free estimate any time, 24/7.
(254) 309-9254Driveway work in three stages
Test the ground and size the drive
Soft soil is found, and the size and thickness set.
Rebuild the base
Unstable material comes out and compacted stone goes back in.
Pour, then keep cars off
A car can go on after 7 to 10 days, kept off the edges at first.
Call or request a free estimate any time, 24/7.
(254) 309-9254What a driveway costs, Waco and national figures
Nationally, 2025 figures put a standard 4-inch drive at $6 to $15 a square foot and a 6-inch drive, the thickness recommended for heavy vehicles, at $8 to $20, with professional grading adding $3 to $8 a square foot. Averages, not our prices.
- 12 x 30 ft
- $2,000 to $3,700
- 24 x 40 ft
- $5,400 to $9,800
Typical Waco prices, un-reinforced concrete, 2024. Averages, not a quote.
Driveway questions for Ross lots
Is a 5-inch driveway worth the extra cost?
The Tennessee Concrete Association is credited with the figure: going from 4 to 5 inches can add nearly 50% to a driveway's load capacity for about 20% more in concrete cost.
Can a home driveway carry a moving van or a loaded truck?
It isn't built for that: a typical home driveway isn't engineered for heavy vehicles such as a large moving van or construction equipment.
What are the signs a driveway needs replacing?
One published guide lists seven: sinking or settling, poor drainage, a badly spalled surface, heavy cracking, signs of neglect, a drive past its prime and lost curb appeal.
Driveway estimates for Ross lots
Choose driveway in the form and add a phone number or email. The estimate is free, and requests are answered at any hour.