Concrete Resurfacing in Ross, TX
Concrete resurfacing in Ross, TX by Waco Elite Concrete bonds a thin cement-based layer, or a fresh coat of sealer, onto worn concrete that is still sound underneath, and pricing the job is free.
Call or request a free estimate any time, 24/7
No charge answered 24/7
Get free estimates
Overlays and sealers on older concrete
In the Census Bureau's 2020–2024 estimates, from a very small sample, about 20% of Ross's housing units were built in 2000 or later, and none in 2020 or after.
Summer sets the calendar. The National Weather Service dates Waco's average first 100°F day to July 4 and its average last to August 30, and the American Society of Concrete Contractors wants water-based sealers applied with both the air and the concrete at 45°F or above and warming, and never over 90°F.
Concrete that is breaking up needs crack and spall repair in Ross before any new surface, and a new pattern can come from a stamped finish; other Ross services are listed too.
Call or request a free estimate any time, 24/7.
(254) 309-9254Resurfacing, start to finish
Sound out the old concrete
The slab is checked for moving cracks, hollow spots and peeling sealer.
Strip and prepare
Old coatings are stripped, and the surface is washed under pressure and roughened for grip.
Resurface, then seal
The new layer or sealer goes on in thin passes, joints are carried through, and traffic waits for the cure.
Call or request a free estimate any time, 24/7.
(254) 309-9254What resurfacing and sealing cost
A basic resurfacing job runs $3 to $7 a square foot nationally (2025), a stamped overlay $8 to $15, and a power wash with a fresh coat of sealer $1.50 to $2. National 2026 driveway figures give resurfacing at $3 to $10 a square foot, with professional sealing at $1 to $2. None of these is our price.
Sealing and overlay questions
Will old cracks show through a new overlay?
They can. A resurfacer maker, QUIKRETE, says cracks reflecting up through the new surface can't be completely prevented, especially without enough control joints or where the slab settles, and the old control joints have to be kept. Butterfield Color likewise wants existing control joints carried up through its overlay.
Will a penetrating sealer leave a shine?
No. Penetrating sealers, the silicones, siloxanes and silanes, add no gloss or slipperiness; they react chemically inside the concrete's capillaries to guard against moisture and deicing chemicals. Acrylic resins are the most common of the sealers that form a film on top.
Which sealer makes concrete color look richer?
Gloss is what deepens color: the shinier the sealer, the richer the concrete looks, and solvent-based acrylics usually bring out more color than water-based ones, by the American Society of Concrete Contractors' guide. It rates gloss from flat (0 to 20) and matte (20 to 40) through semi-gloss (40 to 60) and gloss (60 to 90) to high gloss (80 to 100).
Resurfacing quotes for Ross concrete
Pick resurfacing or sealing in the form and leave a phone number or email. The estimate is free, and requests are answered 24/7.