Open 24/7 Free estimates Serving Waco, Texas

(254) 309-9254

Concrete Slabs in Woodway, TX

Concrete slabs in Woodway, TX, from Bosque Boulevard to the Rainbow Lake area, are formed and poured by Waco Elite Concrete for new houses, additions, shops and storage buildings, and the estimate is free.

Concrete Slabs in Woodway, TX, example photo: post-tension cables laid over a vapor barrier inside slab forms
(254) 309-9254

Call or request a free estimate any time, 24/7

No charge answered 24/7

Get free estimates

A phone number or an email, so we can reach you.

We use your details only for this estimate request. Privacy policy

Slab foundations and building pads in Woodway

Book inspections a day ahead: the City prefers 24 hours' notice, and a failed inspection may bring a re-inspection fee of $50.00 to $125.00, at the inspector's discretion.

Where clay expands when wet and shrinks as it dries, compaction and drainage come first, and one published guide says "the best approach is a structural slab that doesn't bear on the soil at all or a post-tensioned slab". The Post-Tensioning Institute says a post-tensioned slab gets the same capacity from less concrete and steel, and keeps cracks tight. The International Building Code, as PTI quotes its 2015 edition, requires such foundations on expansive soils to be designed to PTI's standard DC 10.5.

Business buildings fall under commercial concrete for Woodway and a slab out back under Woodway patios, while the full Woodway list has the rest.

Call or request a free estimate any time, 24/7.

(254) 309-9254

Pouring a slab, start to finish

  1. Plan for the ground

    Slab type, thickness and steel follow the soil and the load, with an engineer where the design needs one.

  2. Permit, base and steel

    Fill is compacted, forms and steel or tendons are set, and the inspection is booked a day ahead.

  3. Pour and cure

    The slab is placed, finished and cured, and post-tensioned tendons are stressed once the concrete is strong enough.

Call or request a free estimate any time, 24/7.

(254) 309-9254

What slabs cost in Texas

A 2026 regional figure for Texas runs $5.30 to $5.90 per square foot for a new slab, and national 2026 examples are on the ticket. Both are averages, not our prices.

Batch ticketSlab examples, national
80 sq ft shed foundation
$480
200 sq ft parking pad
$1,200
350 sq ft garage floor
$2,100
450 sq ft patio
$2,700

National figures, 2026; averages only.

Before you pour a slab

Does a storage building need a permit in Woodway?

Yes. The City wants accessory structures permitted before they are placed, including pools and all storage buildings, delivered or built on site, even without a permanent foundation. Its fee schedule, effective October 1, 2026, charges $50.00 for one under 200 square feet and $100.00 at 201 square feet or more.

Does a slab on expansive clay need an engineered design?

The 2024 International Residential Code says "Foundation and floor slabs for buildings located on expansive soils shall be designed in accordance with Section 1808.6 of the International Building Code", and McLennan County's 2001 soil survey says foundations should be engineered to the soil, including the depth to bedrock, the depth to a water table and natural drainage. We didn't confirm which code edition Woodway enforces, so ask the City.

What concrete strength does a garage floor need?

The International Residential Code's strength table lists garage floor slabs at 2,500, 3,000 or 3,500 psi at 28 days, for negligible, moderate and severe weathering areas. Which column applies around Waco wasn't confirmed, so the mix is settled with the design.

Get a slab estimate in Woodway

Tick slab on the form, add a phone number or email, and tell us on the call what the slab will hold. Free estimates, answered 24/7.

(254) 309-9254Free estimate