Concrete Sidewalks in Oglesby, TX
Concrete sidewalks in Oglesby, TX, where about 58% of housing units went up before 1980 and the 1950s built more than any other decade, are rebuilt or newly poured by Waco Elite Concrete from the porch to the drive or street, with a free estimate.
Call or request a free estimate any time, 24/7
No charge answered 24/7
Get free estimates
Walks for a town built mostly before 1980
Those figures come from the Census Bureau's 2020–2024 survey estimates: about 119 of 206 units predate 1980, the 1950s account for about 42, and about 33, roughly 16%, date from 2000 or later. A replacement walk has to meet the porch, steps and drive already there.
The ground counts as well. At the town's Census centre point, the county soil survey's rating for concrete driveways and sidewalks is "Very limited". NRCS describes the structures that rating covers as all-weather traffic slabs of poured concrete between 3 and 6 inches thick, and, among that rating's restrictive features, says high shrink-swell "limits the performance and longevity of concrete structures and applications".
Width and fall come next. One planning guide favors garden paths of 4 to 5 feet and says to avoid walks narrower than 3 feet. A 4-foot walk beside the house should sit 1 inch lower on its outer edge than on the side against the wall. Where a walk climbs to a porch, the 2015 International Residential Code sets stairways at least 36 inches wide and lets treads and landings slope no more than 2 percent.
The drive the walk meets is covered under driveways in Oglesby, and chipped or cracked steps under concrete repair. More jobs are on the Oglesby services page.
Call or request a free estimate any time, 24/7.
(254) 309-9254Laying a walk from porch to drive
Trace the route
The walk is measured from the porch to the drive or street, and its fall away from the house is worked out.
Excavate and set the base
The path is dug out, a compacted gravel or crushed-stone base goes down, and the forms are set.
Place, groove and texture
Concrete is placed, grooved with joints at short intervals and given a broom texture for grip.
Call or request a free estimate any time, 24/7.
(254) 309-9254What a new walk costs by finish
In typical Central Texas figures for 2026, broom finishing a walkway costs $6 to $12 a square foot; a gravel or sand base adds $1 to $4 and grading another $1 to $2. Regional averages, not our prices.
- Broom finish
- $6 to $12
- Exposed aggregate
- $7 to $18
- Stamped
- $10 to $30
Typical Central Texas prices, 2026. Not a quote.
Front walk and porch step questions
How deep should the treads on porch steps be?
The 2015 International Residential Code calls for treads 10 inches deep or more, and within one flight the deepest may beat the shallowest by ⅜ inch at most. We found no record of which code edition the City of Oglesby applies, so ask the City.
What does the soil survey's sidewalk rating mean for a walk in Oglesby?
In NRCS's definition, a "Very limited" soil has limitations that generally can't be overcome without major reclamation, special design or expensive installation, and poor performance and high maintenance can be expected. The rating describes the soil in its undisturbed condition, without regard to how the land is used now.
What does it cost to rebuild three porch steps?
National 2025 figures put 3 poured steps at $600 to $1,500, or $300 to $1,100 precast, and step repair at $300 to $800 on average.
Price a front walk or porch steps
Choose sidewalk or walkway on the form and leave a phone number or email. Estimates are free, and requests are answered day or night.