Stamped Concrete in Riesel, TX
Stamped concrete in Riesel, TX starts with a free Waco Elite Concrete estimate that measures the area, prices the pattern tier and checks whether an existing slab is sound enough for a stamped overlay or needs a new pour.
Call or request a free estimate any time, 24/7
No charge answered 24/7
Get free estimates
Pattern tier, slab and sealer: the estimate's checklist
Riesel's Construction Permit Application has blanks for job type, estimated cost, square footage and a job description. A written estimate fills in those numbers, whether or not a permit turns out to apply.
Color is the next choice. Integral color, mixed through the whole batch, mostly comes in earth tones and pastels. Hardener, scattered by hand over the fresh surface, colors only the top, so it reads more intense; it also strengthens and densifies that surface and helps the stamps leave sharper imprints. Keep the secondary, accent color between 5% and 30% of what the eye sees; past 40%, it can impair sealer adhesion.
For a new slab out back, see patios in Riesel; an older stamped surface that needs a fresh coat comes under Riesel resealing and resurfacing, and all our Riesel concrete services are on the town page.
Call or request a free estimate any time, 24/7.
(254) 309-9254From measured layout to sealed pattern
Measure and choose
Area, pattern and color method are settled, and the price is put in writing.
Press the pattern
Color goes into the fresh concrete, mats are pressed into the surface, and the edges are detailed by hand.
Wash, wait, then seal
Leftover release is washed away, and sealer goes on once the slab has cured.
Call or request a free estimate any time, 24/7.
(254) 309-9254Stamped and stained concrete prices
The national ticket shows how the price climbs with the pattern tier, from basic to high-end (2026). A reseal, due every two to three years, runs $200 to $600 each time nationally (2026). These are averages, not our prices.
- Basic pattern
- $10–$14 / sq ft
- Mid-range
- $14–$20 / sq ft
- High-end
- $20+ / sq ft
- 288 sq ft patio, basic
- $2,880–$4,032
- 640 sq ft driveway, basic
- $6,400–$8,960
National averages, 2026. Not a quote.
Stamping and staining, asked in Riesel
What is the average cost to stain concrete?
Nationally, stained concrete floors run $3 to $11 per square foot (2026). To stain a patio that's already there, with prep and sealer included, expect $3 to $15 a square foot (national, 2025). On properly prepared concrete the stain color won't fade, chip or peel, and outdoor stained surfaces are protected with a clear sealer.
Can an old slab be stamped without being torn out?
Often, by laying a stamped overlay over it, usually between 1/4 and 3/4 inch thick. That may not work if the slab has large cracks, significant spalling or severe settlement, which is why the estimate looks at the old concrete first.
What sealer goes on stamped concrete?
Acrylic is the most common choice outdoors, usually in two thin coats. The American Society of Concrete Contractors says penetrating sealers typically aren't used on stamped work, because they don't protect the antique color left by the release.
Stamped concrete, measured and priced free
Select stamped concrete in the form and leave a phone number or email. There's no charge for the estimate, and requests are answered 24/7.